Cementaid Steelite - Impact resistant floor hardener

Floor Surface Treatments

STEELITE

Metallic Aggregate Floor Hardener. For heavy duty concrete floors, resistant to impact shock or point-contact loads (as in engineering works, workshops, tracked vehicle floors or roads, etc.)

EFFECTS:	Increases resistance to mechanical surface damage from heavy impact, point-loading and severe abrasion by 500-800%, and hence effective life of floor. Increases 'Slip-resistant' nature of surface.
NOTE:	1. Always assist optimum results by using CALCURE curing membrane. 2. In damp, wet or corrosive environments, corrosion protection by using CALTITE heavy duty water-proofing compound, is most important. Contact CEMENTAID for special recommendations.
WHERE RECOMMENDED:	All heavy-duty floors, such as engineering works, workshops, tracked vehicle floors or roads All areas subject to traffic of wheeled trolleys, or any kind of impact loading, or storage and handling of heavy or angular objects.

SPECIFICATIONS

Monolithic Floors and Toppings
All floors (state areas) shall be rendered shockproof by the application of STEELITE metallic aggregate at the rate of 2-6kg per sq. metre.
The STEELITE shall be mixed with an equal quantity of cement and distributed evenly over the FRESHLY SCREEDED surface in at least two 'throws' at right angles to each other to give even distribution.
The STEELITE shall then be trowelled in by hand with WOODEN FLOATS and later machine trowelled to a hard dense finish.
Where STEELITE is used at 3.5kg per sq. metre or more, it shall be mixed with cement at the rate of 2 STEELITE: 1 Cement.

INDUSTRIAL FLOOR SPECIFICATIONS - GEL CONTROL AGENT - ANTI-CORROSION IMPREGNATIONS - OIL & SOLVENT PROOFING - WATERPROOFING - RAPID HARDENING RETARDING - SURFACE TOUGHENING - MORTAR AND DAMPCOURSE ADMIXTURES, ETC.

The information and recommendations herein are, as a result of experience and testing, accurate to the best of the seller's knowledge. However, as the proposed use and the circumstances surrounding such use are not known to the seller, it does not guarantee or warrant the product's suitability in any particular instance and shall not be liable for any loss or damage consequent upon any use whatsoever unless the seller has otherwise stipulated the product's suitability for a particular use in writing signed by a Director of the seller.