RAPIDARD
High Early Strength and Set
Accelerating Admixture
EFFECTS: |
Produces normal concrete strength in reduced times as follows:
Rapidard contains special high-early-strength components, plus Calcium chloride, plus anti-corrosion factors. Rapidard increases workability considerably, and the mix may be adjusted to take advantage of this, by reducing water content about 1 litre for each litre of Rapidard used. |
||||||
SETTING TIME: |
Rapidard has only a limited effect on initial setting time, being designed for adequate time for working and placing, and yet accelerate strength gain after setting. At 1 litre/bag, setting time will be reduced by about 30% at 2 litres, by about 50%. If required, this can be corrected by use of PLASTET No. 2 for set retardation. When used in place of water the Rapidard causes cement to harden in minutes. |
||||||
WHERE RECOMMENDED: |
For early stripping of formwork, early use of concrete structures, increased mold turnover for pre-cast units. Also for large concrete floor pours, to allow finishing to closely follow placing.. |
||||||
CAUTION: |
NOTE: Rapidard contains calcium chloride and is not recommended for prestressed concrete or reinforced concrete exposed to moisture or dampness. (See SUPERPLASTET F) |