CALGROUT No. 2
Fast-Set, Non-Shrink Grout.
USES: |
Grouting Anchor Bolts for metal stanchions, ladders, ornamental iron work, theatre seats, etc. Permits re-alignment when setting, provides high early strength. Grouting Columns more effective and economical than bush hammering and shimming with lead. More effective and quicker than sand cement grout. Patching Defects in concrete, such as honey-combed areas. Filling Tie Rod Holes where water pressures are encountered. Sealing Joints between wall and floor slabs, around wall openings for pipes, etc. Setting and Bed for steel tiles. Grouting Joints between pre-stressed or precast concrete sections. Setting Steel Handrail Posts into concrete landings treads. Allows complete bond for topping over. Sealing cracks against water penetration. |
CALGROUT CHARACTERISTICS: |
CALGROUT No. 2 is a special flash-setting grout for use where setting time of 30 seconds or so is required. This may be extended to as much as 10 minutes by use of Plastet, at 300ml to 400ml per bag of grout. |
STANDARD MIXES: |
Neat Mix 1 bag 'CALGROUT' Mixed with Aggregates: For large openings under columns use course aggregates not greater in size than 1/4 of the opening and mix with equal volume 'CALGROUT' adding sufficient water to achieve degree of work-ability desired. |
COVERAGE: |
One 25kg bag yields approx. 0.014 cubic metres. |