CEMENTAID INTERNATIONAL GROUP OF COMPANIES

Form Oils, Curing & Bonding Agents

CALCURE B

Concrete curing to obtain full effective properties of concrete without external cover or application of water. Specially formulated not to interfere with bond of subsequent toppings, render, lino tiles etc.


EFFECTS:

Calcure B is a unique PVA based material, which seals the surface of fresh concrete with a clear colourless membrane to reduce moisture loss, without affecting subsequent bond of toppings or render.

WHERE RECOMMENDED:

Where concrete floors are to be used as working surfaces during curing; locations where labour costs of standard curing are high (country roads, culverts, etc.); substrates to receive toppings or render without removal of curing compound

CONTACT CEMENTAID FOR APPLICATION SERVICE

CAUTION:

Do not specify Calcure B or other membrane type curing agents when surface hardeners or corrosion sealers such as Cementaid DIAMITE OR ROKITE are specified to be used. In such cases specify water, damp sand or plastic sheet curing.

Detailed information on special uses, test results, projects previously using products, and special recommendations are available from your nearest Cementaid Technical Office

For application Rega pneumatic knapsack spray is recommended with No. 9, 10 or 11 fantail nozzles.

SPECIFICATIONS

All concrete shall be cured by a liberal application of CEMENTAID CALCURE B sprayed on to surfaces at the rate of 1 litre per 5-7 square metres. The sprayed membrane shall be applied immediately following initial set.

INDUSTRIAL FLOOR SPECIFICATIONS - GEL CONTROL AGENT - ANTI-CORROSION IMPREGNATIONS - OIL & SOLVENT PROOFING - WATERPROOFING - RAPID HARDENING RETARDING - SURFACE TOUGHENING - MORTAR AND DAMPCOURSE ADMIXTURES, ETC.

The information and recommendations herein are, as a result of experience and testing, accurate to the best of the seller's knowledge. However, as the proposed use and the circumstances surrounding such use are not known to the seller, it does not guarantee or warrant the product's suitability in any particular instance and shall not be liable for any loss or damage consequent upon any use whatsoever unless the seller has otherwise stipulated the product's suitability for a particular use in writing signed by a Director of the seller.




       
Link to Spec-Net Construction & Engineering Gateway